How to Perfectly Install the SPC Vinyl Flooring

 Breaking News
  • No posts were found

How to Perfectly Install the SPC Vinyl Flooring

August 03
16:36 2020
How to Perfectly Install the SPC Vinyl Flooring

SPC flooring is more and more popular around the world. Do you also want know how to easy to install? After reading this article you will have the answer.

SPC Flooring installation preparation:

Installation loss: When calculating square-footage and ordering SPC flooring please adding at least 10%-15% for cutting & waste.

Temperature: Before installation, we must place the vinyl click SPC flooring horizontally on a flat floor more than 24 hours to adapt the new environment.

Sub-Floor Requirements: We should make sure that the installation surface must be dry, clean and free of any debris.

Flatness: Sub-floor must be flat to a tolerance of 3/16’’ per 10’’ radius. And the surface slope must not exceed 1’’ in 6’’. Otherwise, we need to do self-leveling to make the floor flat.

Expansion Gap – An expansion gap of 1/2” to 5/16” must be provided at all walls and fixed

vertical surfaces to allow for expansion.

Install tools:

* Utility Knife • Tape Measure • Painters Tape • rubber Hammer • Tapping Block • Spacers

* Safety Glasses • NIOSH-Designated Dust Mask

SPC Flooring Installation Instructions of Uniclic:

Position the panel’s short side to be installed to the panel already installed. Move the panel gently up and down while exerting forward pressure. The panels will automatically click into place.

After the flattening, the distance between the panel’s length side to be installed and the panel already installed should be about 2-3 mm into a parallel line.

Then life the panel’s length side about 45 degree from the ground. And insert the tongue into the groove, until they locked together. When the board is completed, the floor should be flat and seamless.

Please remove the spacers and install the baseboards/T-moldings in the correct places.

It is the UNICLC lock install.

Media Contact
Company Name: TopJoy Industrial Co., Ltd.
Contact Person: Media Relations
Email: Send Email
Phone: (+86)21-39982788
Address:Unit 603 Building 7, Lane 2449, Jinhai Rd, Pudong New Area
City: Shanghai 201209
Country: China
Website: https://www.topjoyspcfloor.com/

Related Articles

Categories