Concord News Now

DryShield to offer Online Estimates for Crack Injections

 Breaking News
  • No posts were found

DryShield to offer Online Estimates for Crack Injections

September 23
21:06 2019
DryShield to offer Online Estimates for Crack Injections
DryShield is offering online estimates for crack injections.

Toronto, Ontario – September 23, 2019 – DryShield, a Toronto based waterproofing company, is offering online estimates for crack injections. Whether cracks have been led by hydrostatic pressure, pressure developing on the back/opposite side of the wall due to inappropriate backfill, soil setting, or shrinkage, they have to be repaired right away. The more the cracks remain the greater probability it is that the foundation will form structural damage. Furthermore, water could even seep into the basement through the crack, forming the probability of mould growth, water damage, as well as more structural problems.

Low-pressure injection is an economical and quite efficient solution for repairing structural and leaking cracks in poured foundations. Crack injection is not only low-cost; it is even an efficient basement crack repair solution for the reason that it basically deals with the void spaces that forms the crack.

The concept for crack injection is to inject a liquid polymer (generally a two-part polyurethane or epoxy) inside the crack. Two component epoxy and polyurethane foam are the highly efficient materials in concrete crack repair. The method lets the material to move all over the crack, efficiently filling the crack after curing. Two-component epoxy efficiently seals a crack and simultaneously strengthens the repair part. Epoxy is generally utilized for structural related cracks in the foundation. Through epoxy injection, the repaired crack basically turns out to be notably robust. Polyurethane is generally suggested for non-structural cracks.

Moreover, foundation crack repair offers waterproof stability to keep the basement dry and avert the damage as well as additional cracking of the foundation.

DryShield’s technicians start the process by drilling holes at forty five degree angle every six to eight inches, alternating from left to right, along both sides. Then, steel ports are fastened into the holes. Subsequently, the ports are injected with polyurethane from bottom to top with hydraulic pressure. Moreover, steel ports are utilized to obtain sufficient pressure in order to make sure urethane is distributed uniformly.

The hydrophobic polyurethane expands twenty times its volume to seal all crevices from front to back. An additional method is carbon fibre stripping. Cuts are made at right angles to the crack. Afterwards, carbon fibre strips are installed encoded with epoxy.

About the company

DryShield is a Toronto based waterproofing company with more than 25 years of experience in the domain. Services offered by the company include basement waterproofing, sump pump installation, basement crack injection, etc.

Media Contact
Company Name: Dryshield
Contact Person: Nathan Thava
Email: Send Email
Phone: 1-800-277-5411
City: Toronto
Country: Canada
Website: https://www.dryshield.ca/